Wooden Door Machines

Wooden Door Manufacturing Machines

Деревянные Станки для изготовления дверей

ماكينات تصنيع الأبواب الخشبية

Porta de madeira máquinas de fabricação

Drvena vrata strojevi

Machines druri Prodhim Door

Bois machines de fabrication de portes

 

 

WD 500 - Automatic Door Keyhole Hinge Slot Opening Router Machine

Technical Specifications:

Ability to use single functions of opening key place,lock place,handle place,hinge place seperatly.

High frequency 18000 rpm motors for drilling the holes of key,lock,handle,hinge areas very fast and clean.

Ability to automatically switch between left and right while operating with rabbet edge doors.

Pneumatic clamps to hold the door during operation

Pedal controlled

Automatic central positioning of the lock area with a switch for choosing rabbet edge or flush (butt) edge door.

Only operates on door not doorcase


Optional :

 Apparatus for routing the hinge area

 

 

 

WD 200 - Door Keyhole hinge Slot Opening Router Machine

 

Technical Specifications:

Door keyhole routing function

Door hinge slot routing function

Doorcase hinge slot routing fuction

Doorcase lock slot routing fuction

Very clean door installation procedure without filings

Easy door installation because of all holes opened according to same mould

All operations of the door ( keyhole,lockhole,hinge slot,plate slot) and doorcase (keyhole,hinge slot) finished with single machine.

 

 

Woodline Machine / Doorframe Router WD-300

 

Technical Specifications:

After sandwich door panel is producesd the side edge lines,trimming lines,rabbet edges and width can be cut witg 6-8 milling saws automatically.
Produces 17sec. / m doorframe length.
2 vertical 2 horizontal motors
Width adjusted manually
10-400mm frame width operation ability
rabbet edge height and trimming height can be adjusted.
Upper clamp pressing system provides very strong holding
PLC computer opreation
6 or 8 saws

Optional:

Automatic width adjusting unit
Emery ( Sandpapering) Unit